Q52 Firmware
900MHz Beta testers: please read this
important notice.
New Keys
Your Q52 will have to be re-keyed to use firmware versions greater
than V0.41. Please email your device's MAC address to
support for a new key and
instructions.
V0.68 2007/11/30 (ZigBee
2006 Stack)
- EmberZNet 3.0.2 support
- Security support
- Changes to settings restarts ZigBee stack
- Persistent settings support
- Fixed bugs in Leave implementation
- Duplicate frame rejection
- ZDP Permit-Joining support
- ZDP group addressing support
- Added indirect APS ACK handling
- Added APS IB (tunable parameters)
- Added APSME GET and SET requests
- Added APSME security interface
- Fixed problem discovering units with invalid IP address
- Increased Telnet command history to 10
- Fixed bug in CSMA-CA algorithm
- Myriad minor bug fixes
V0.46 2007/7/9 (ZigBee
2006 Stack)
- First release with ZigBee 2006 Stack support
V0.45 2007/7/9 (ZigBee
2004 Stack)
- Syslog support
- SNMP support
- Various shell command additions and changes
- Performance improvement (D-Cache enabled)
- Configurable RSSI offset
- Various SNTP fixes
- New keying method
- ZigBee Coordinator capability
- ZDO Device Profile binding/unbinding
- APS binding table
- Configurable ZIPT ACK timeout
- Fixes to end-device packet routing
- DHCP fixes
- Fixed bug in upgrader (gzip max length)
- Fixed bug in CRC calculator
V0.35 2007/4/16
- Fixed removal of current IP address from stack
- Fixed bug in TFTP send
- Improved ZMD driver stability
- Added ZMD driver debug counters
- Added multicast MDMP
V0.32 2007/4/12
- Added channel data to Neighbor and Peer Tables
- Added "debug sysinfo" sub-commands
- Fixed INET configuration
V0.29 2007/3/29
- Added store command to disable radios
- Fixed UDP checksum bug that affected first sent packet
- Fixed SNTP bugs
- Added debug info for mutex and task
V0.27 2007/3/15
- Updated RTOS and TCP/IP Stack
- Numerous performance improvements
- Refactored MCPS and NWK modules
- Peer table changed to handle routes to nodes over multiple media
- Fixes to NWK when a child leaves
- Routing algorithm ignores neighbor table, per spec
- Added "debug zbtest command"
- Added AF functions
- Fixed (RERR) route error message processing
- Improved HTTP upload performance
- Added support for more ZigBee device profile requests
V0.21 2007/2/25
- Boot-time duplicate IP address check (ARP)
- Adjusted task priorities to maximize performance
- Fixed display of 900MHz frequencies
- Configurable boot-time energy scan
- Increased memory allocation for TCP/IP
- ZIPT Hello/Goodbye handshaking
- MAC Orphan scanning
- NWK Leave now causes MAC Reset
- MAC Disassociate support
Know Issues
- Confirm messages from indirect send
- MAC Purge and rx-enable handling
V0.18 2007/1/24
- Added join indication from NWK to APS
- Supports 802.15.4 Dissassociate
- Supports Get/Set requests
- Handles orphan indication
- Supports NWK Route Error messages
- Known Issue: Q52s within range on the same channel can provoke a packet storm.
V0.14 2006/12/22
- Added "debug zbnwk edscan" command
- Fixed channel scanning bug
- Fixed LQI processing in ZMD driver
- MCPS ACK timeout configuration for each radio
- Added "debug os" command
- Improved currency of neighbor table entries
- Minor HTML cosmetic improvements
V0.13 2006/12/8
- NWK rework (NLME requests, neighbor table, etc)
- Supports multiple ZIPT links
- ZIPT source verification
- HTML layout improvements
- Fixed ZIPT token configuration
- Added timeout to JOIN request
- Separated ZIPT "radio"
- Fixed beacon scan bugs
V0.10 2006/11/22
|
